Preparation for impregnation and protection of decorations, delivered in the form of a paste. It gives additional gloss and facilitates maintenance of surfaces formed with FOX DEKORATOR CLASSIC STUCCO.

Place of use: walls and ceilings indoors.

Substrate type: plasters, concrete, stone, plasterboards, wood-like and any other sound, previously cleaned and prepared substrates.


Forms transparent coating, gives gloss, protects against soiling; facilitates maintenance of surfaces, emphasizes decorative effect, preserves original colour of stucco.


Substrate preparation:

The substrate should be appropriately sound, stabilized, free of layers which would impair product bonding, in particular of dust, dirt, lime, oils, grease, residues of paints and other. The substrate must be completely dry.

Product preparation:

The product is delivered ready to use. Mix well before use.


Product is ready to use.


FOX DEKORATOR DECORATIVE WAX is applied with a brush or a cloth. Apply upon surfaces 0.5 up to 0.7 m² large and distribute with uniform thin coat. When it slightly dries, polish with a cotton sponge. When the surface is polished, apply and polish the next ones until the whole surface gets coated.


Average consumption: approx. 0.016 kg/m² per coat (0.3 kg of product for approx. 18 m² of decoration). The actual consumption depends on substrate texture and absorptiveness, quality of substrate preparation, expected decorative effect, technique of application, user’s experience, number of coats.


Temperature of use: from +5 °C to +30 °C

Number of coats: 1 - 2

Time of drying: tack-free surface after approx. 2 h

Application of subsequent coat: after 4 h

The product has been given the Hygienic Attest.


Keep out of reach of children. Avoid contact with skin and eyes. After direct contact with eyes – wash with plenty of water and contact a doctor, Wear protective gloves/protective clothing/eye protection/face protection. If swallowed: Immediately call a doctor, show package or label. Follow the instructions of the Safety Data Sheet.

Keep in tightly sealed containers in dry conditions. Protect against overheating and freezing. Apply in temperature from +5 °C up to + 30 °C. In low temperature and/or high humidity the time of drying can extend.  Shelf life in conditions as specified is 24 months from the production date shown on the packaging.

The technical data sheet cannot give description of any substrate type and techniques of their preparation. In case of application upon substrates not described above contact our technical advisors for further information. Advices and inspirations are also available on our web site



Plastic containers: 0.5 kg

Product used in the following effects: