WOOD PUTTY

USE

Ready-to-use, water-dilutable putty designed for filling surface and deep gaps or irregularities (scratches, cracks, cavities) in the surface of wood or wood-based materials.

Place of use: wood and wood-based elements.

Substrate type: appropriately cleaned and prepared wood or wood-based materials.

PROPERTIES

Contains timber dust; great bonding to the substrate; perfectly absorbs stains, varnishes, waxes; high mechanical resistance; can be grinded, planed, cut or drilled after drying; easy in use; colour range matching natural wood.

APPLICATION

Substrate preparation:

The substrate should be thoroughly cleaned, dry, smooth and even, free of dust, greasy or resinous stains.

Greasy or resinous wood should be washed with naphtha and dried. Proper substrate preparation speeds up and facilitates the application.

Product preparation:

The product is delivered ready to use. Mix well before use.

Application:

Apply the filler uniformly with a metal spatula, press well to fill the whole gap. In case of wider cavities or greater irregularities, the subsequent coats should be applied when the previous ones dry. After drying, grind the whole surface with sand paper. Dedusted surface can be painted or varnished.

150g

300g

TECHNICAL DATA

Temperature of use: from +5°C up to +30°

Number of coats: 1 or more

Time of drying: tack-free surface after approx. 2 h; 24 h in case of large gaps

Application of subsequent coat: after 2 h

Dilution: water – dilute in 5-10% of water if needed

Technical requirements: Hygienic Certificate issued by Polish Institute of Hygiene

Shelf life: 24 months

IMPORTANT ADDITIONAL INFORMATION

Clean the tools with water just after use.

Keep out of reach of children. Avoid contact with skin and eyes. After direct contact with eyes – wash with plenty of water and contact a doctor, Wear protective gloves/protective clothing/eye protection/face protection. If swallowed: Immediately call a doctor, show package or label. Follow the instructions of the Safety Data Sheet.

Keep in tightly sealed containers in dry conditions. Protect against overheating and freezing.

PACKAGING

Plastic containers: 150 g, 350 g.

ATLAS sp.z o.o.
ul. Św.Teresy 105
91-222 Łódź

NIP 947-193-64-67
REGON 100253695
KRS 264887

Zakład Produkcyjny Wrocław
ul. Gazowa 3
50-513 Wrocław

tel. +48 71 33 66 651
faks: +48 71 33 67 098
e-mail: fox_biuro@atlas.com.pl

Infolinia dotycząca produktów:
605 613 777 - czynna od poniedziałku do piątku 
w godzinach od 8.00 do 16.00
 
Szczegółowa mapa kontaktów

Export Department:

tel. +48 42 714 0792

e-mail:  export@atlas.com.pl