CONCRETE

USE

Application of decorative plasters – trendy artistic plaster making a perfect decoration of modern residential and public access interiors.
Ideally combines with metal, glass and rough timber. Its surface resembles natural raw concrete.
Place of use: walls and ceilings indoors.
Types of substrate: plaster, concrete, stone, plasterboards, wood-like boards and any other sound, clean and appropriately prepared substrate.

PROPERTIES

Substrate preparation

The substrate should be: sufficiently sound, stable, free of layers which would impair product bonding, in particular dust, dirt, lime, oils, fats, residues of paints and other. Primed with FOX DEKORATOR CONTACT COAT.

Substrate preparation
The substrate should be: sufficiently sound, stable, free of layers which would impair product bonding, in particular dust, dirt, lime, oils, fats, residues of paints and other. Primed with FOX DEKORATOR CONTACT COAT.
Product preparation
The dry product should be mixed with water, keep the ratio 1.5 – 1.75 l of water for 5 kg of dry plaster (0.3-0.35 l of water for 1 kg of dry plaster).
Leave the mixed mass in a closed package for 24 h, re-mix then. One can add a little bit of water in order to reach the preferred consistency.
Colouring
Product of defined colour.
Plastering
Plan the order and way of application before work, check the final effect on a small sample first!
The CONCRETE plaster is applied with two coats. Apply the first coat smooth, keep the coat thickness same as the grain size, leave to dry completely (12-24 h, depending on temperature and humidity in a room).
Slightly moist the whole decorated surface with water before application of the second coat. Apply the second coat evenly upon the whole decorated surface. The drying plaster should be troweled with the flat-applied trowel edge. When troweling, the plaster pores get sealed and characteristic surface smoothness forms.
Depending on the intended top finish (delicate or intensive multiple polishing with a trowel), the smooth, matt or satin glossy surface forms.
Individual, scattered scores and gaps make the concrete surface more decorative. Remember to keep the trowel edge perfectly clean during work.

2

CONSUMPTION

Average consumption: 0.9 kg of dry mix for 1 m² for a single coat. Note that the coverage depends on substrate texture, absorptiveness and preparation, intended decorative effect, installer’s experience, coat thickness, number of coats, application method. In order to check the actual coverage for particular conditions, one should apply a sample upon the actual substrate first. 

TECHNICAL DATA

Temperature of use: from +5°C up to +30°C, the time of drying can extend in low temperature and/or high humidity Number of coats: 2

Time of drying: dry when touched after approx. 12 h Application of subsequent coat: after 12-24 h, depending on coat thickness

Dilution: water (0.3-0.35 l / 1 kg of dry mortar)

Technical requirements: Hygienic Certificate issued by Polish Institute of Hygiene

Shelf life: in dry form with no time limit, in liquid form – 24 months

 

PACKAGING

Plastic containers 5 kg, 10 kg

Product used in the following effects:

ATLAS sp.z o.o.
ul. Św.Teresy 105
91-222 Łódź

NIP 947-193-64-67
REGON 100253695
KRS 264887

Zakład Produkcyjny Wrocław
ul. Gazowa 3
50-513 Wrocław

tel. +48 71 33 66 651
faks: +48 71 33 67 098
e-mail: fox_biuro@atlas.com.pl

Infolinia dotycząca produktów:
605 613 777 - czynna od poniedziałku do piątku 
w godzinach od 8.00 do 16.00
 
Szczegółowa mapa kontaktów

Export Department:

tel. +48 42 714 0792

e-mail:  export@atlas.com.pl